Moisture Analyzers

IR-120 Moisture Analyzer

Applications Galore.
With a working range of 0.1 to 99.9% moisture, the IR-120 is appropriate for nearly any type of sample. Programmable one, two or three-step drying procedure allows rapid drying of the sample without scorching. Store up to 100 custom programs, each with their own alphanumeric identification for easy recall.

Great Choice for Multiple Users.
Simply press the TEST key and the instrument will prompt the user through the analysis. Three features help with the uniformity of sample analysis. 1.) The target weight allows easy weigh-in of the sample and assures the correct sample size. 2.) Starting parameters for the test, including a time delay to be sure the instrument is ready. 3.) User ID tracks which operator performed the test while the printout provides a space for a signature.

Advanced Heating Element.
The IR-120 Moisture Analyzer features the new coil quartz infrared heating element, which is specially designed to provide the consistent heating you've come to expect from Denver Instrument. The heating element is housed in a motorized heating hood that can be opened at a keypress or set to close automatically before a test. The hood retracts into the body of the moisture analyzer providing direct, overhead access to the weighing pan for easy sample entry.

Features
• Quartz coil infrared heating element
• Single-block weighing technology with 0.001g resolution for precise results
• Readability of 0.01%
• Internal balance calibration
• Store up to 100 custom programs
• Programmable one, two or three-step drying procedure
• Fully adjustable endpoint criteria to maximize efficiency and accuracy
• Motorized heating hood for full access to sample
• Store up to 250 test results
• Built-in dot-matrix printer and RS232 port
• Security feature to prevent unauthorized changes

Downloads		Other
literature manual		factory rebate offer request info Moisture FAQ

IR-120 Moisture Analyzer Specifications
Working Range	0.1 - 99.9%
Measuring Method	Infrared radiation, loss on drying
Heat Source	quartz coil infrared heater
Temperature Setting	40° - 210°C in one degree increments
Temperature Control	Platinum temperature sensor +/- 5°C
Temperature Steps	Programmable; one, two or three
End of Analysis Mode	Time-out, automatic slope or fully adjustable
Units of Results	% moisture, % solid, % moisture dry, weight loss (g or mg)
Readability of Results	0.01%
Balance Capability	120g
Balance Readability	1mg (0.001g)
Program Storage	100 programs
Data Storage	Statistics on 9,999 points
Display	Back-lit liquid crystal display
Integrated Printer	Dot matrix
External I/O	Serial unidirectional RS-232C
Power requirements	115 or 230 VAC, 50/60 Hz
External Dimensions (L x W x H)	18.0 x 13.8 x 6.0" (457 x 351 x 152mm)
Net Weight	18 lbs. (8 kg)

IR-35 Moisture Analyzer  IR-35 Moisture Analyzer  IR-120 Moisture Analyzer